United States
Select country
  • Europe
  • North America
  • South America
  • Asia / Pacific
  • Middle East / Africa

Safety related control system for machinery

 

Where safety is based on the proper operation of the machine control system, it shall be designed so that to ensure a minimal probability of functional errors. Otherwise, any errors shall not lead to the loss of the safety function. In Europe, to meet these requirements it is highly recommended to use the harmonized standards developed by mandate of the European Commission (assumption of conformity). Using the harmonized standards saves extra time and costs where proof of conformity of the safety-related control system to the essential requirements of the Machinery Directive shall be demonstrated.


Given hereunder are the basic concepts of the new standards ISO 13849-1 and IEC 62061 which supersede EN954-1 as regulatory instruments covering machine control systems.


Note: categories are not necessarily totally hierarchical


Functional safety standards

ISO 13849-1 and IEC 62061 - Within the limits of scope and scope, these two norms provide presumption of compliance with essential requirements 1.2.1 of Annex I to Directive 2006/46/EC.

 

Next ... ISO 13849-1 PL